STEEL AISI D2 SQUARE PRE MACHINED LENGHT 500mm

-Z160CDV12 REC 500

C Cr Mo V
1,55 12,0 0,7 1,0 in %

Quantity :

Dispatched within 10 days

14.56€ Excluding VAT

17.47€ VAT INCLUDED

	LARGEUR EN MM
EPAISSEUR EN MM	10.3	15.3	20.3	25.3	30.3	40.3	50.3	60.3	80.3	100.3	125.3	150.3	200.3	250.3	300.3
1.2						46.87€		58.21€		78.25€
1.6						42.97€		49.64€
2.2	17.47€	19.07€	20.65€	22.24€	23.84€	27.01€	32.51€	35.94€	39.77€	49.85€	57.77€	66.42€	97.40€	106.76€	120.88€
3.2	19.07€	20.66€	22.24€	23.83€	28.21€	30.19€	35.94€	39.35€	46.20€	54.17€	64.55€	73.91€	98.83€	116.98€	131.98€
4.2	20.65€	22.24€	23.84€	27.01€	30.19€	33.65€	39.35€	46.19€	51.35€	56.92€	66.42€	76.21€	102.14€	120.73€	143.64€
5.2	22.48€	25.21€	27.66€	30.12€	33.36€	36.54€	46.19€	51.34€	56.46€	62.24€	76.50€	88.31€	115.40€	145.37€	169.38€
6.2	25.67€	29.08€	31.60€	35.94€	39.35€	46.19€	51.34€	54.74€	67.43€	74.77€	85.87€	100.43€	129.80€	157.46€	196.08€
8.2	30.79€	33.56€	35.59€	39.35€	44.48€	51.34€	51.00€	58.64€	76.08€	91.20€	103.87€	120.73€	160.63€	191.60€	219.56€
10.4	32.53€	35.94€	39.35€	44.50€	47.90€	52.31€	61.08€	68.29€	92.21€	106.04€	130.52€	148.25€	190.03€	220.00€	253.43€
12.4		41.50€	44.95€	51.29€	57.48€	61.22€	72.61€	82.26€	116.12€	128.22€	149.26€	190.03€	239.45€	284.40€	340.00€
15.4		48.70€	47.69€	56.34€	66.13€	76.80€	89.76€	102.29€	135.00€	159.34€	179.51€	215.68€	279.94€	344.76€	405.42€
20.4			68.58€	39.50€	82.85€	99.71€	116.84€	128.80€	168.12€	196.96€	215.39€	256.73€	317.40€	374.15€	458.72€
25.4				88.90€	95.66€	115.40€	131.98€	148.25€	185.42€	219.97€	251.70€	286.27€	396.19€	471.40€	569.36€
30.4					157.32€	128.95€	143.35€	168.12€	214.80€	255.00€	278.35€	371.70€	479.47€	552.36€	641.68€
40.4						202.56€	172.08€	181.38€	244.44€	313.04€	379.93€	437.71€	559.22€	656.54€	779.74€
50.4									259.24€	352.48€	450.36€	503.72€	604.20€	724.63€	916.87€

Export in pdf

Send to a friend

description

Notice

Good toughness, maximum wear hardness, minimum distortion, nitrable after special heat treatment Applicability Cutting tools and punching dies for materials with high toughness, shear blades, trimming dies, planetary rolling mills, parts sensitive to breaking Supply Length 500 and 1030 mm, in plate form with square cross section and as square dimensions, soft annealed, max. 255 HB ((max. 860 N/mm2)

Heat Treatment Data Stress-relief annealing 650 - 700 °C Soft annealing 800 - 850 °C Hardening 1000 - 1050 °C Hardening Oil, air or warm bath 500°, gas excess pressure Quenching 480 - 580 °

description

Notice

Reviews about this STEEL AISI D2 SQUARE PRE MACHINED LENGHT 500mm (0 reviews)

There is no review for this item, add the first one.

[Add your review]

Products