(2000 copies remaining)
Description
Fast curing , heat resistant product, which retains cylindrical joints with excellent resistance against temperature and acids, alkalines and water. Approved acc. to EN 751-1 (DVGW) and to NSF ANSI 61 for use in commercial and residential potable water systems not exceeding 82° C. NSF P1 listed for use in food processing areas.
Note: This is a regional approval. Please contact us for more information and clarificationComplies with the guide formulation of the German Federal Environment Agency, published 2016, February 11th, for use in contact with drinking water. According to DVGW TRGI 2008, in Germany not allowed for use in household gas-installations
Attention: If used as sealant against water, please observe and follow the special handling
instructions for pipe-sealants.
Physical Properties (liquid product)
Chemical Base: Diester of Methacrylic Colour: Acid green/ fluorescent Viscosity acc. to Brrokfield RVT at 25°C:
Spindle 2, 20 rpm 450 – 650 mPas
Density at 25°C: 1.10 g/cm3
Max. thread diameter: M 20
Max. gap filling: 0.15 mm Flash point: > 100°C
Shelf life: 1 year at ≤ 25°C
Physical Properties (cured product)
Measured on M10 x 20 bolt - grade 8.8 black phosphatized - nut 0.8d (no on-torque)
Initial strength after: 2 – 6 minutes
Functional strength after: 0,5 – 1 hour
Final strength after: 2 – 4 hours
Loose-break torque: > 25 Nm DIN 54454
Prevailing torque: > 40 Nm DIN 54454
Shear strength:> 27 N/mm2 DIN 54452
Thermal range: - 55°C up to +175°C
Reviews about this Retaining compound, temperature resistant ergo 4453 50g (0 reviews)
30.54€
30.84€
6.72€
33.48€
22.62€
21.78€
24.24€
23.58€
24.54€