» »
» » Aluminium alloy EN-AW 8079 Pure aluminium, mat. no. 3.0502 (Al 99.0%)
Aluminium alloy EN-AW 8079 Pure aluminium, mat. no. 3.0502 (Al 99.0%)
See larger image
I have seen this product cheaper elsewhere.

Aluminium alloy EN-AW 8079 Pure aluminium, mat. no. 3.0502 (Al 99.0%)

-CPALR515

Due to its low specific weight and good formability, aluminium can be used for a wide range of applications. EN-AW8079 contains iron and silicon, giving it a higher tensile strength.

Quantity : 
+
-
Available Dispatched within 10 days

Dimension-Prix-1891

19.20€ Excluding VAT
23.04€ VAT INCLUDED
Add to quotation requests

  Dimension
PrixPrix
CLINQUANT ALUMINIUM 5M.150 X 0.02523.04€
CLINQUANT ALUMINIUM 5M.150 X 0.0524.24€
CLINQUANT ALUMINIUM 5M.150 X 0.1026.64€
CLINQUANT ALUMINIUM 5M.150 X 0.1531.80€
CLINQUANT ALUMINIUM 5M.150 X 0.2035.40€
Facebook - Partager
LinkedIn
Viadeo
description
Notice

Material Data sheet                                                                               Issue: October 2015

 

Download file here:

https://sbc-trading.fr/images/Image/File/Aluminium-alloy-EN-AW-8079.pdf

 

Aluminium alloy EN-AW 8079 Pure aluminium, mat. no. 3.0502 (Al 99.0%)

 

  1. Applications:

Due to its low specific weight and good formability, aluminium can be used for

a wide range of applications. EN-AW8079 contains iron and silicon, giving it a higher tensile strength. This allow is therefore used for aluminium foils of a thickness of

up to around 0.05 mm.

 

Due to its relatively good thermal conductivity, pure aluminium is also used for heat exchangers (however, alloys 3003 or 6063 should be used in soldered heat exchangers).

As a result of its high electrical conductivity, aluminium can also be used in the electronics industry and, thanks to its high reflective properties, in lamp reflectors

 

 

Aluminium is not suitable for springs.

 

2.  Material codes:

 

 

EN-AW 1200

EN-AW 8079

German Norm:

3.0205

No number given

EN:

EN-AW 1200 Al 99,0

EN-AW 8079

AFNOR:

1200

8079

UNS:

A 1200

A 8079

 

  1. Chemical composition: *

 

Bezeichnung

Si

Fe

Cu

Mn

Zn

Ti

Andere

Al:

EN AW-1200

Max. 1,0%

<0,05%

<0,05%

<0,1%

<0,05%

<0,15%

>99,0%

EN AW-8079

0,05-

0,3%

0,7-

1,3%

<0,05%

-

<0,1%

-

<0,15%

Rest

 

* the exact composition of each batch can be documented by a material certificate

2.2 or 3.1 according to DIN EN 10 204.

 

4.  Delivery condition:

Condition:                     temper rolled, not hardenable

Surface:                        bright Ultimate tensilestr.:       > 150 N/mm²

 

Further mechanical data: see chapter 7 and 8.

 

5.  Sizes:

Thicknesses:                0.025 – 0.20mm

Standard size:             150 mm

Edges:                           cut

Lenghts:                        individual lengths from 5 to 10 000mm or as coil

 

The following sizes are available from stock (without obligation), status: October 2015:

 

Thickness in mm

Tensile strength

Alloy

Annotation

0,025

>180 N/mm²

EN-AW 8079

 

0,05

>150 N/mm²

EN-AW 1200

 

0,07

>150 N/mm²

EN-AW 1200

 

0,10

 

EN-AW 1200

No tensile strength available

0,15

>150 N/mm²

EN-AW 1200

 

0,20

>150 N/mm²

EN-AW 1200

 

 

6.  Tolerances:

Thickness tolerance: +/- 10% at 0,05mm, Widthtolerance: normal Straightness:                normal

Flatness:                       wave height max. 1mm

 

7.  Further mechanical data:

Yield str. Rp0,2 :         depending on the tensile strength ElongationA 50:           depending on the tensile strength

 

Aluminium should not be used for springs.

 

Temperatures of more than 300 ° Celsius should be avoided.

 

8.  Physical properties

Density:                                 2.71 g/cm³

Thermal conductivity:          210-230 W/(m °C) depending on the temperature Spec. heatcapacity:    897 J/(kg °C) mean value at 50 – 100 °C Thermal expansion:        23,6 x 10 -6 (between 30 - 100 °C)

Electric conductivity:           36.6 x 10 -6 A/(V x m) (equivalent to 59 % IACS)

 

Modus of elasticity:             69 000 MPa at 20 °C

Relative permeability µr:    aluminium is not magnetisable

 

9.  Blanking

We recommend a punch-to-die clearance of 4-10 % of the strip thickness.

The corner radius should be at least 0.25 mm and the punching die should be at least twice the strip thickness.

 

10.  Laser cutting

This alloy can be laser cut by solid state lasers.

 

11.  Photo etching

Aluminium can be etched easily.

 

12.  Bending

Soft aluminium can be bent or drawn easily.

Please notice the following minimum bending radius for aluminium in the temper rolled condition (please see DIN EN 486-2, table 4):

 

Up to a thickness of 0.20mm:

  1. x strip thickness at bending at right angle (90°) to the rolling direction.
  2. x strip thickness at bending parallel to the rolling direction (this data is missing in the DIN EN485-2).

 

13.  Flat grinding and polishing

Aluminium is not magnetic and can not be hold by magnetic clamping devices of flat grinding machines. Aluminium is difficult to polish.

 

14.  Welding

Aluminium is suitable for welding with MIG or WIG.

 

15.  Corrosion resistance

Aluminium has a passivating oxide layer and is resistant to many environmental conditions. A strong caustic or acidic environment solves the passivating layer and corrodes the material.

Aluminium is resistant against sea water.

 

At a contact to unalloyed steel can cause rust marks. We also suggest a galvanic isolation to copper and copper alloys.

 

Important Annotation

The specifications which are given in this technical information sheet about the condition and application of the alloys are only for reference and are no confirmation about certain performances and characteristics.

The information correspond to our own experiences and experiences of our suppliers.

We can not guarantee for the results during processing and utilisation.

 

Back to top
description
Notice

Reviews about this Aluminium alloy EN-AW 8079 Pure aluminium, mat. no. 3.0502 (Al 99.0%) (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top

Customers who bought Aluminium alloy EN-AW 8079 Pure aluminium, mat. no. 3.0502 (Al 99.0%) also bought :